From Tree to Fence

Compared to our CT house, our house in MA has even more ragged old White Pines that need clearing. I haven't yet had a chance to get really started, but I did take one dead tree down recently when I needed to build a section of rail fence to act as a gate in the stone wall. After cutting and setting posts to match the mailbox post that I made, I needed a 14 ft section of rail to fill the gate opening. This is far longer than the split rails available at the store but there was a simple solution.

I selected an old dead tree about 12 inches in diameter and cut it down, then quartered it and shaped the ends of 3 of the quarters into split rails. The chainsaw and my back got a workout, but I was pretty happy with the fence. For variety I made an .mp4 video slideshow of the process (warning, if you're at work turn off your speakers, as there is music accompanying the slideshow). For those who might not want to play a video just look beyond it on the page; I included the same photos of the process just as usual.

 

Fence Photo 1

I moved the rocks to create a generous passway through our stone wall (you can see a few at right which were too heavy to move far!), then set posts to build a split-rail style gate. This is the post design: I cut the posts from a 6x6 treated hemlock to match the mailbox post that I made the same way. The split rails necessitated cutting receiving slots though. I didn't have a Forstner bit big enough, so I used a hole saw and chisel to cut each slot through. This step took longer than any other part of the project, including felling and sawing up the tree.

 

Fence Photo 2 Fence Photo 3 Fence Photo 4

I felled a tree about 12 inches in diameter, then cut a section about 14 feet long. I also cut myself a couple of log horses, then split the log in half.

 

Fence Photo 5 Fence Photo 6

The bark just peeled away as I quartered the log.

 

Fence Photo 7 Fence Photo 8

I shaped each end to fit into the posts, testing each one to make sure I could remove the rail fairly easily, as this is meant to be a gate (an infrequently used gate anyway).

 

Fence Photo 9 Fence Photo 10

And here's the finished gate, with and without my somewhat grubby self.

 

Fence Photo 11

One last photo showing the view from the back yard along the side of the house to the front wall and gate.

Questions about, or problems with this site?

Contact the Webmaster